HEIGHT (vertical “active area”)
HTOTAL (horizontal total) ****(refer to the figure below)
Make sure the value of HSTART added to the value of WIDTH does
not exceed HTOTAL.
Note: V TOTAL: (vertical total) ****(refer to the figure below)
Make sure the value of VSTART added to the value of HEIGHT
does not exceed V TOTAL.
REDGAIN
GREENGAIN
BLUEGAIN
AUTO ADJUST (performs automatic alignment of VGA image
inside the window)
AUTO GAIN (performs automatic gain adjustment by correcting the
color values)
CVBS/YPbPr Adjustment: this feature is designed to adjust a CVBS or
YPbPr misaligned or color-off signal due to a long cabling situation.
Note: Only available when the signal is CVBS or YPbPr.
DEFAULT
HSTART (horizontal starting position)
WIDTH (horizontal “active area”)
VSTART (vertical starting position)
HEIGHT (vertical “active area”)
HTOTAL (horizontal total) ****(refer to the figure above)
Make sure the value of HSTART added to the value of WIDTH does
not exceed HTOTAL.
Note: V TOTAL: (vertical total) ****(refer to the figure above)
Make sure the value of VSTART added to the value of HEIGHT
does not exceed V TOTAL.
Parameter:
LAMBDA (only available when output signal is set at
BRIGHTNESS
CONTRAST
SHARPNESS
SATURATION (only available when signal is non-RGB; or HDMI
YCbCr422 / interlaced. It can only be set for YUV color space.)
HUE (only available when signal is non-RGB; or HDMI YCbCr422 /
interlaced. It can only be set for YUV color space.)
DEFAULT
