Selects the desired “sampling structure/pixel depth” based on output
signal’s “image format” and “frame/field rate.”
YCbCr422
10-bit
425M Level A/B
425M Level B is only available for 1080p@50, 1080p@59.94,
1080p@60, 2048p@23.98, 2048p@24 (Hz)
YCbCr444
10-bit
425M Level A
RGB444
12-bit
425M Level A/B
XYZ444
12-bit
425M Level A/B
1. Map structure is not available when “OUTPUT PORT”
”STANDARD”
is set at “VESA.”
2. Map structure is locked at YCbCr422 when output resolution is at SD_525, SD_625, 1080p@50,
1080p@59.94, 1080p@60 (Hz).
3. Map structure can only be RGB444 or XYZ444 when output resolution is at 2048p@23.98, 2048p@24
(Hz).
On: enables the color bar and current pattern select feature. The color bar
can only be turned on when there is no input signal. (default setting is On)
COLOR BAR
2×2 CROSSHATCH
Off: disables the display of the color bar.
The input port currently selected is displayed as follows, (Input Port: VGA,
Input Port: CVBS, etc.) If the selected input is digital such as SDI, DVI, or HDMI
then the “VGA Adjustment” and “CVBS/YPbPr Adjustment” portions of the
image adjustment menu are not available. With digital signals use the (“Image
Adjustment” / “Parameter”) portion of the menu.
When the selected input signal is VGA, CVBS, or YPbPr, the “VGA
Adjustment” and “CVBS/YPbPr Adjustment” portions of the “Image
Adjustment” menu are available.
Auto-detect (firstly CVBS, SDI, YPbPr, VGA, DVI, and lastly HDMI)
VGA Adjustment: this feature is designed to adjust an analog VGA
signal that may be misaligned or off-color due to a long cabling
situation.
Note: Only available when the signal is VGA.
DEFAULT
HSTART (horizontal starting position)
WIDTH (horizontal “active area”)
VSTART (vertical starting position)
