8
Electrical connection
• Important: do not
connect to the power
supply before you
have finished
connecting the oven
and cooktop.
• Make sure the
appliance is installed
and connected to the
electricity supply by a
qualified technician in
accordance with the
manufacturer’s
instructions and in
compliance with local
regulations.
• The installer is
responsible for the
correct electrical
connection of the
appliances and the
observance of the
relative safety
recommendations.
• The appliance must be
connected to the
electricity supply by
means of an all-pole
disconnect switch with
minimum contact gap
of 3 mm.
• The appliances must be
earthed by law.
• Do not use multiple
plug adapters or
extension leads.
• After the oven has
been installed, the
electrical components
must be concealed.
• Make sure that the
voltage shown on the
rating plate is the
same as the power
supply voltage in your
home. The rating plate
is on the front edge of
the oven cavity (visible
with oven door open).
4gb53201.fm5 Page 8 Wednesday, June 19, 2002 2:15 PM
