83
Water drainage
The end of the drain hose can be positioned in three ways:
Hooked over the edge of a sink using the
plastic hose guide supplied with the
machine. In this case, make sure the end
cannot come unhooked when the machine
is emptying.
This could be done by tying it to the tap
with a piece of string or attaching it to the
wall.
In a sink drain pipe branch. This branch
must be above the trap so that the bend is at least 60 cm above the
ground.
Directly into a drain pipe at a height of not less than 60 cm and
not more than
90 cm.
The end of the
drain hose must
always be venti-
lated, i.e. the
inside diameter of
the drain pipe
must be larger than the outside diameter of the drain hose.
The drain hose must not be kinked.
Important!
The drain hose may be extended to a maximum of 4 metres. An additional
drain hose and joining piece is available from your local Service Centre.
Installation
132974420_gb.qxd 01/02/2007 14.38 Pagina 83
