Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
After removing all the packaging, carefully
lay machine on it’s back to remove the poly-
styrene base from the bottom.
Remove the power supply cable and the
draining hose from the hose holders on the
rear of the appli-
ance.
With a suitable
spanner, supplied
with the machine
unscrew and
remove the central
rear bolt A. Slide
out the relevant
plastic spacer.
Unscrew and
remove the two
large rear bolts B
and the six smaller
bolts C.
Remove the
bracket D. Tight-
en up the six
smaller bolts C.
80
HEC0008
HEC0002S
A
HEC0001
HEC0011S
D
C
C
B
HEC0003S
B
C
C
HEC0014
132974420_gb.qxd 01/02/2007 14.38 Pagina 80
