Now start...
1
Take two of the foam corners from
n
the carton and place
them on the floor behind
the dishwasher.
Personal Injury Hazard
Because of the weight and size of
this dishwasher, two people may be
required to lift dishwasher.
Failure to do so could result in
personal injury.
2
Stand on the right or left side of
W the dishwasher. Firmly grasp the
body of the dishwasher and gently lay it
on its back on the foam corners,
Product Damage
Check that casters are locked in
place. If casters are not locked,
they may fall out when the
dishwasher is moved or cause the
dishwasher to vibrate during use.
3
Firmly push casters into holes at
w the corners of the dishwasher.
Check that casters are locked in place.
You may need to lightly tap casters with
a small hammer until they lock in place.
4
Stand dishwasher back up.
n
Open door and remove
beaded foam shipping pieces
from racks,
washer 4 e
a
screen
screen holder
or aerator-
5
Remove the screen holder or
.
aerator, and washer, from the
end of the faucet.
Use the faucet adapter kit that came
with your portable dishwasher to modify
the faucet where the dishwasher will be
used.
Faucets with external threads
Use faucet
adapter kit,
Part No. 3374592.
Insert the 2
screens and then
the thin washer
into faucet
adapter. Attach
adapter onto
end of faucet.
The thick washer
is not used.
faucet adapter
aS thin washer
\
- screens
faucet adapter
Numbers
correspond
to steps.
Faucets with internal threads
faucet adapter
kit, Part No.
3374592
thick washer -m
thin washer
-a
screens
faucet adapter +
Use adapter kit, Part
No. 3374592. Insert the
2 screens, the thin
washer and then the
thick washer into faucet adapter.
Attach adapter onto end of faucet.
Both washers are used.
For other faucet types: See your local
dealer or parts distributor for a special
adapter kit.
Note: If the dishwasher will be used at a
faucet equipped with a spray hose
attachment, constant water pressure
may affect the spray hose. To prevent
potential problems, the spray hose
should be permanently disconnected
or replaced with a high-pressure hose.
6
CHECK THE ELECTRICAL
H REQUIREMENTS TO BE SURE YOU
HAVE THE CORRECT ELECTRICAL SUPPLY
AND RECOMMENDED GROUNDING
METHOD. Check the Installation
Instructions to see that you have
completed each step. If you have
skipped a step, go back and complete
that step before you continue with the
following steps.
Panel B
