NOTE: REMOVAL OF DASHBOARD REQUIRED TO INSTALL THE EVAPORATOR. VINTAGE AIR
RECOMMENDS THAT YOU UTILIZE THE FACTORY SERVICE MANUAL WHEN YOU
DISASSEMBLE AND REASSEMBLE THE DASHBOARD.
GLOVE BOX DOOR. SEE FIGURE 3
GLOVE BOX (DISCARD, RETAIN SCREWS). SEE FIGURE 2
HEATER ASSEMBLY AND ALL RELATED DUCTING (DISCARD), RETAIN SCREWS.
SEE FIGURE 3.
DR/ PASS SIDE LOUVER OUTLETS (RETAIN). INSTRUMENT PANEL MUST BE REMOVED TO GET TO LEFT OUTLET,
AND CONTROL PANEL. SEE FIGURE 3.
CONTROL PANEL ASSEMBLY (RETAIN CONTROL PANEL) SEE FIGURE 3.
REFER TO CONTROL PANEL CONVERSION KIT INSTRUCTIONS FOR INSTALLATION OF CONTROLS.
REMOVE DR/ PASS SIDE KICK PANEL (RETAIN). DISCONNECT PASS SIDE FRESH AIR CABLE FROM PANEL
SEE FIGURE 3. DISCONNECT DR/ PASS CABLE ASTRO-VENTILATION DUCTING (DISCARD).
REMOVE OEM DEFROST DUCT ASM.
DR SIDE
ASTRO VENTILATION
DUCT
FIGURE 2
FIGURE 3
DRIVER SIDE
LOUVER
DR SIDE
KICK PANEL
CONTROL
PANEL
INSTRUMENT
PANEL
GLOVE BOX
PASSENGER SIDE
LOUVER
PASS SIDE
ASTRO
VENTILATION
DUCT
ASTRO
FRESH
PASS SIDE
KICK PANEL
GLOVE BOX
DOOR
HEATER
ASSEMBLY
PASSENGER COMPARTMENT
REMOVE THE FOLLOWING:
