ADAPTER
49881-VCI
ADAPTER
49881-VCI
INSTALL
(3) S-CLIPS
INSTALL
(3) S-CLIPS
PASSENGER SIDE
DRIVER SIDE
1/4-20 x 1”
BOLT w/
WASHER
SILICONE
FRESH AIR
CAP
2”
2”
BACK SIDE
OF FRESH AIR
CAP
MARK AND
DRILL 5/8
HOLE
OEM
HEATER HOLE
IN FIREWALL
OEM
HEATER HOLE
IN FIREWALL
ENGINE
COMPARTMENT
SIDE OF
FIREWALL
HOSE ADAPTER INSTALLATION
FRESH AIR COVER INSTALLATION
INSTALL S-CLIPS ON HOSE ADAPTERS AS SHOWN IN FIGURE 9 BELOW
INSTALL DRIVER & PASSENGER SIDE HOSE ADAPTERS ON OEM LOUVERS. SEE FIGURE 9 BELOW.
APPLY A 1/4” BEAD OF SILICONE AROUND THE BACK SIDE OF THE FRESH AIR CAP AS SHOWN IN
FIGURE 10, BELOW.
ATTACH FRESH AIR CAP TO FIREWALL USING A 1/4-20 x 1” BOLT AND WASHER, SEE FIGURE 10,
BELOW. (NOTE: FRESH AIR CAP INSTALLS ON ENGINE SIDE
OF FIREWALL.)
DRILL 5/8” HOLE IN FIREWALL AS
SHOWN IN FIGURE 10 BELOW.
INSTALL GROMMET AS
SHOWN IN FIGURE
12, PAGE 11.
FIGURE 9
FIGURE 10
