OEM
CENTER LOUVER
ASSEMBLY
65118-VUP
CUT FAOM STRIP
APPROX 7”
CENTER LOUVER INSTALLATION
MOUNTING
HOLES
62614-VCE
CENTER LOUVER
HOSE
ADAPTER
(2) #8 x 1/2”
PAN HEAD
SCREWS
CENTER LOUVER
DUCT HOSES
OEM SCREWS
INSTALL FOAM STRIP ON CENTER LOUVER ASSEMBLY AS SHOWN IN FIGURE 14 BELOW.
INSTALL CENTER LOUVER DUCT HOSE ADAPTER ON CENTER LOUVER ASSEMBLY. SEE FIGURE 14.
USING THE (2) MOUNTING HOLES ON THE BOTTOM SIDE OF THE DUCT HOSE ADAPTER AS SA GUIDE
DRILL (2) 1/8” HOLES IN LOUVER ASSEMBLY. SECURE DUCT HOSE ADAPTER TO LOUVER ASSEMBLY USING
(2) #8 x ½” PAN HEAD SCREWS. SEE FIGURE 14a, BELOW.
RE-INSTALL DASH.
PULL CENTER LOUVER DUCT HOSES THROUGH DASH AND ATTACH TO CENTER LOUVER DUCT HOSE
ADAPTER AS HSOWN IN FIGURE 15 BELOW.
INSTALL CENTER LOUVER ASSEMBLY IN DASH, USING OEM MOUNTING SCREWS SECURE LOUVER ASSEMBLY
TO DASH. SEE FIGURE 15
FIGURE 14
FIGURE 14a
FIGURE 15
