8825/8830 Controller Setup Manual for Firmware 6.0 105
Configuring the Printer Processing Defaults (continued)
Setting the Undersize Margin option
Undersize Margin Purpose
When PAPER is set to a value for auto size detection (ANY, ANY_ANSI,
ANY_ARCH, or ANY_ISO), then the undersize margin option determines the
threshold for selecting a smaller, installed paper size to fit the printed image
within the tolerances selected.
Range: 0-100%
Default: 2%
PATH TO UNDERSIZE MARGIN OPTION
Display <IDLE>, press [ON-LINE], display <PAUSED>, press [ENTER],
display <UTILITIES>, pr
ess [NEX
T] until <PRO
CESSING DEFAULT
S> is
displayed, press [ENTER], display <ELECTRONIC COLLATION>, press
[NEXT] until <UNDERSIZE MARGIN> is displayed.
SELECTING THE UNDERSIZE MARGIN OPTION
Press the ENTER key to change the option. Enter the under size margin %
desired on the Keypad (0 -100%) then press the ENTER key.
EXITING THE UNDERSIZE MARGIN OPTION
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.
