8825/8830 Controller Setup Manual for Firmware 6.0 104
Configuring the Printer Processing Defaults (continued)
Setting the Oversize Margin option
Oversize Margin Purpose
When PAPER is set to a value for auto size detection (ANY, ANY ANSI, ANY
ARCH, or ANY ISO), then this parameter determines the threshold for
selecting a larger, installed paper size to fit the printed image within the
margin tolerances selected.
Range: 0-100%
Default: 1%
PATH TO OVERSIZE MARGIN OPTION
Display <IDLE>, press [ON-LINE], display <PAUSED>, press [ENTER],
display <UTILITIES>, pr
ess [NEX
T] until <PRO
CESSING DEFAULT
S> is
displayed, press [ENTER], display <ELECTRONIC COLLATION>, press
[NEXT] until <OVERSIZE MARGIN> is displayed.
SELECTING THE OVERSIZE MARGIN OPTION
Press the ENTER key to change the option. Enter the over size margin %
desired on the Keypad (0 -100%) then press the ENTER key.
EXITING THE OVERSIZE MARGIN OPTION
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.
