79
Programme end
The programme end is indicated by:
the Door Free indicator coming on and the remaining time indicator (if available) showing 0:00.
1.
Turn the water supply tap off.
2.
Wait for the door to unlock (about one minute).
3.
Open the door and unload the machine. The programme
sequence indicators are all off.
N.B.
Do not fully close the door but leave it ajar to allow the drum to dry out.
Changing programme and options
1.
Press the
Start/Pause
button. The
Start/Pause
button flashes.
2.
Select the new programme, options and spin speed.
3.
Press the
Start/Pause
button. The new programme resumes the wash programme at the
same stage at which the preceding one was interrupted.
For this programme do not add any further detergent.
Programme interruption or pause
To interrupt the running programme for a certain period and continue it at a later time:
1.
Press the
Start/Pause
button. The indicator flashes.
2.
Following the desired pause press the
Start/Pause
button once again.
Cancelling the programme
If the current programme is to be terminated prematurely and cancelled, the water must be pumped
out first before the door can be opened:
1.
Set the programme selector to programme setting
Drain
. The indicator (if available) above the
Start/Pause
button flashes. The spin indicator shows 0 and the remaining time indicator shows
0:02 minutes.
2.
Press the
Start/Pause
button in order to start the
Drain
programme.
