
77
WASHING PROGRAMME
Filling the detergents and additives
1.
Pull out the detergent dispenser to its full extent. The dispenser
will have three or four chambers depending on model.
2.
Fill the detergent:
Programme with pre- and main wash
Main wash programme without prewash
When using liquid detergent, remove the coloured
insert and fit it in the compartment.
The graduate scale on the insert makes dosing easier.
Fabric softeners and conditioners, no more than
to MAX mark (three chambers model
B
)
or the 100 ml mark (four chambers model
A
).
Chlorine bleach, no more than to MAX mark
(four chambers model
A
).
Stain remover agents
Water softeners (water hardness class 4)
Starch (dissolved in water)
3.
Close the detergent dispenser completely.
Selecting the programme:
1.
Plug in the appliance.
2.
Turn on the water supply tap.
3.
Set the
Programme Selector
knob to the desired programme.
4.
Select additional
options
, if desired, pressing the corresponding button.The indicator lights up.
By a
further pressing
of the button this option can be turned off again.
5.
Press the
Start/Pause
button.
The indicator light will come on and the programme duration is shown on the display (if available).
The indicator lamps show the sequence reached in the programme. After starting the programme, the
sequence indication runs from left to right through Wash, Rinse, Spin.
When the sequence of the programme is finished the corresponding lamp goes out.
Options
(depending on model)
Easy Ironing
Can be used together with Cotton and Synthetics programmes to make ironing easier.
Increases the water quantity and the clothes are spun very gently.
Energy save/
Eco
Increases the programme time and reduces the temperature. This reduces energy
consumption by about 30% without compromising the excellent results of the wash.
Prewash
Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle
time increases approximately 15 min.
Quick wash /
Rapid
Select for quick, economical washes.
Especially suitable for small, lightly soiled loads.
Note:
If Quick wash is selected, only the Rinse Hold and Spin speed reduction
options can be activated.