78
Intensive
Rinse
More water and a longer time in rinse cycle is added.
The intensive rinse function is especially suitable for areas with particularly soft
water, for baby clothes and to help people with allergies.
Rinse hold /
Spin delay
The laundry remains in the last rinse water without being spun, to avoid heavy creasing.
Especially suitable for the Synthetics or Delicates programmes, if the laundry
is not to be unloaded immediately after the end of the programme. This function
is particularly useful if you want to postpone spinning to a later time or when you
do not wish to spin the clothes.
Note:
The programme stops to Rinse Hold at the time the Rinse Hold light in the
programme flow indication is on.
Continuing wash cycle after rinse hold:
Press the Rinse hold button again; the load will be spun according to the selected
programme.
If you do not wish to spin the clothes, turn the programme selector knob to the
drain programme and press the
Start/Pause
button.
Spin speed
reduction
Press this button to reduce the predetermined automatic maximum spin speed. In
some programmes the maximum final spin speed is limited to go easy on your
laundry items. Selection of a higher spin speed is not possible.
With the "Cotton" and "Synthetics" programmes a short spin cycle is provided in
any case, even if the exclusion has been selected, in order to optimize rinsing
results.
If the spin speed 0 is selected, the final spinning is cancelled. The water is
drained out only.
Start delay
(if available)
Select the programme and temperature, any additional options and the spin speed.
Pressing the Start Delay button the associated display comes on. Press the Start Delay button
repeatedly until the desired number of hours is reached. If the maximum number of hours is reached
for the delayed start, further pressing of the button starts the counter at zero again.
Press the
Start/Pause
button in order to start the programme, it will start after the selected time.
Correct the start delay
The start delay hours can be corrected even after the
Start/Pause
button has been pressed: press it
repeatedly until the desired number of hours is reached. Once the display has counted down the
selected programme is started and the related programme remaining time is displayed.
Cancel the start delay
Turn the programme selector and set it to the desired programme. The remaining time of the selected
programme is displayed and the
Start/Pause
button flashes. The programme can now be started
immediately by pressing this button.
N.B.
With liquid detergent, a dosing aid placed directly in the drum should be used if a start delay
has been selected.
Door lock
The door locks automatically after the programme start until the end of the programme.
The Door Free indicator is on, before the starting and at the end of the programme.
If the programme selector is moved to the position or if the electricity supply is interrupted, then
after approximately one minute the door is released.
In this case do not open the door, because hot water could be released from the appliance.
