11
My computer does not recognise the wireless function of the 802.11g 54Mbps Router
after I changed the settings.
Possible Solution:
Ensure that you are connecting to the correct 802.11g 54Mbps Router by verifying the correct
MAC address. Ensure that the correct passphrase and encryption option is being used. If you
changed the settings in the configuration of the 802.11g 54Mbps Router, you must also change
the settings of every Wireless adapter attached to this network. The settings of the Wireless
adapters must match the new settings of the 802.11g 54Mbps Router.
I cannot achieve 54 Mbps connections to the 802.11g 54Mbps Router.
Possible Solution:
Make sure the wireless products you are using to connect to the 802.11g 54Mbps Router support
54 Mbps speeds. 54 Mbps wireless products must be used in order to connect to the 802.11g
54Mbps Router at a rate of 54 Mbps. Launch the router’s Web User Interface and manually set the
connection speed to 54 Mbps. If you are using non-U.S. Robotics wireless products, you may
need to upgrade the firmware for those products in order to support 54 Mbps connections.
Possible Solution:
Low connection speed or range can also be caused by environmental interference. Try to move
the product around to improve the link quality. In addition, keep in mind that other factors such
as lead based paint, concrete walls, and electronic items such as 2.4G phones may affect your
wireless range.
I plugged in the 802.11g 54Mbps USB Adapter but I do not see the Configuration Util-
ity icons.
Possible Solution:
If you installed the 802.11g 54Mbps USB Adapter without installing the software and drivers first,
you will not see the Configuration Utility. If the Installation CD-ROM is in your CD-ROM drive,
remove it. Insert the Installation CD-ROM into your CD-ROM drive, select your product, and then
click Software. Click Wireless USB Adapter Utility and Drivers. Follow the on-screen instructions
to finish the installation procedure. If you are prompted, restart your computer.
Windows could not locate the drivers for the 802.11g 54Mbps USB Adapter.
Possible Solution:
The software must be installed before the 802.11g 54Mbps USB Adapter is connected to your
computer. Click Cancel on the Found New Hardware Wizard screen, unplug the 802.11g 54Mbps
USB Adapter from your computer, and perform the Installation Procedure again, making sure to
install the software and drivers first.
I cannot connect to the Internet.
Possible Solution:
Check the Configuration Utility icon for the 802.11g 54Mbps USB Adapter in the system tray to
confirm the connection status. If you are connected to your Wireless Router, the icon will be green
or yellow. If the icon is red, open the Configuration Utility and scan the area so that you can con-
nect to the correct wireless network.
Possible Solution:
