SCION xD/xB 2008- LEATHER STEERING WHEEL
Procedure
Page 4 of 12 pages
Issue: B 04/18/07
DIO only
4. Remove Steering Wheel Assembly.
(a) Make sure the steering wheel is centered and
the front wheels are in the straight-ahead
position.
(b) Remove the steering wheel mounting nut and
retain. (Fig. 4-1)
(c) Apply grease to the tip of the center bolt
(09953-05020) of special tool.
NOTE: Must use the special tools to prevent
potential damage.
(d) Using the special tool, remove the steering
wheel assembly. (Fig. 4-2)
5. Remove Cruise Control Switch.
(If equipped)
(a) Disconnect 2P connector of the cruise
control switch.
(b) Loosen the two screws and remove the
cruise control switch, following the direction
indicated by the arrow in the figure.
(Fig. 5-1).
(1) Use caution not to scratch the design face
with the stalk of the switch when
removing it.
Spinner Handle, Extension, Socket (19 mm)
Mounting Nut
Fig. 4-1
Fig. 4-2
Adjustable Spanner
Wrench (19 mm)
Puller C set (P/N 09950-50013)
Wrench
19 mm
Ad
ustable S
anne
Cruise Control Switch
Screws x2
Fig. 5-1
Phillips Screwdriver
Removing Direction
3P Connector
