corresponding buttons to change those
values. The green pilot light of the button 9
starts flashing.
The dial can be turned either clockwise or
counterclockwise. Turn to position « Off » to
reset programme/Switching the machine off.
At the end of the programme the
selector dial must be turned to
position «Off» , to switch the machine
off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 9 will blink 3 times
to indicate a wrong selection. The
machine will not perform the new
selected programme. The message
Err is displayed for a few seconds. The
machine will not perform the new
selected programme.
Select the spin speed or
the available functions
Press button 4 repeatedly to change the spin
speed if you want your laundry to be spun at
a speed different from the one proposed by
the washing machine.
You can also choose «No Spin» («0»), «Rinse
Hold » or «Quiet» function. The display will
show the corresponding description.
Select the desired options
Press the relevant buttons to select the
available options. Depending on the
programme, different options can be selected
together. These must be selected after
choosing the desired programme and before
pressing the «Start/Pause» button. If an
option which is not compatible with the set
wash programme is selected, the red Start/
Pause light flashes 3 times and the message
Err is displayed for a few seconds.
When the option is set, it will appear in the
relevant rectangle on the display or the
relevant symbol icon will be displayed.
For the compatibility among the
washing programmes and the options
see chapter «Washing Programmes».
Select the delay start
Before you start the programme, press this
button repeatedly to select the desired delay.
The set delay time value (up to 20 hours) will
appear on the display for a few seconds, then
the duration of the programme will appear
again. The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours and
then by 1 hour up to a maximum of 20 hours.
You can cancel the delay time at any moment,
before you press the «Start/Pause» button.
Selecting the delayed start
You must select this option after you have set
the programme and before you press the
«Start/Pause» button.
• Select the programme and the required
options.
• Select the delay start.
•
Press button 9 : the machine starts its
hourly count down. The programme will
start after the selected delay has expired.
Opening the door throughout the
delay time
If you wish to add laundry in the machine
during the delay time
•
Press button 9 to put the machine in pause.
• Add the laundry, close the door
•
Press 9 button again.
Cancelling the delayed start
• Press button 9 .
• Press «Delay start» button once until the
symbol «0’» is displayed.
14
