If the «Rinse Hold» or «Quiet» option
has been selected the «Door lock»
light is on, the «Start/Pause» button
light goes out and the display shows a
flashing «0». The door cannot be
opened because the water must be
drained. To empty out water read the
paragraph «At the end of the
programme».
3.3 Options : Easy Iron and Extra Rinse
symbols, Prewash, Stain, Intensive
description. If an option is enabled, the icon
or the description is on.
3.4 Wash time message:
• Duration of washing programme in
hours and minutes, after you have selected
a programme. While the programme is
running (after you have pressed the Start/
Pause button), the displayed time value
decreases by one unit every minute.
When selecting the «proportional»
programmes, the display shows the
washing duration of the maximum
recommended load. After the «Start/
Pause» has been pressed, on the
display «Wash time» message starts
flashing to indicate that the appliance is
calculating the laundry amount and the
real duration. During this time, the
washing duration shown decreases.
When the calculating phase has
finished, the «Wash time» stops
flashing. The washing time is adjusted
to the real load.
•
Delay start , a time value indicated in
hours and minutes and selected by pressing
the delay start button. The delay time (20
hours max) is displayed for a few seconds,
then the duration of the selected
programme reappears. After you have
pressed the Start/Pause button, the
countdown is updated every hour, and, for
the last hour, every minute.
•
An alarm code indicates a fault with the
machine (see the relevant chapter).
•
An incorrect option selection has
been made: this is indicated by the message
Err for a few seconds when an option
incompatible with the current programme
is selected.
•
The washing machine has completed
the programme : this is indicated by a
flashing zero. The «Door lock» pilot light
and the Start/Pause light go out and the
door can be opened.
•
The washing machine has stopped
with water in the tub , at the end of the
«Soak» or of a programme with the «Rinse
hold» or «Quiet» option: this is indicated
by a flashing zero. The «Start/Pause» light
goes out but the «Door lock» pilot light is
still on. The door cannot be opened.
3.5 Quick option. If enabled, the description
is on.
3.6. Delay Start : the description is on if the
Delay start is set.
3.7. Child lock symbol.
11
