LAN User Manual
MAN10244-01 4
1.3 Network Parameters
The network parameters can be handled using different ways:
• Using HTTP service. See chapter 6 for details.
• Using Remote Setup Utility, through Serial or USB Interfaces. See basic User Manual.
• Using Compuprint NetViewMaster application. See specific NetViewMaster User Manual.
• Using the SNMP-MIB2 compatible protocol; Standard MIB plus private MIB objects. See chapter 7 for
details.
The available parameters for LAN configuration are:
MAC Address
It is the hardware address of the LAN (it is read only)
HTML Contact
This function allows to create the name of the html contac using a 14-character string.
Default is www.compuprint.com.
Host Name
The host is identified by a name in the NetBios protocol over TCP/IP. This function allows to create the
name of the host using a 14-character string.
Default is GDS_xxxxxx where xxxxxx are the last 6-digits of the MAC address.
Workgroup Name
The workgroup is identified by a name in the NetBios protocol over TCP/IP. This function allows to
create the name of the workgroup using a 14-character string.
Default is P_NFFPS_TO.
Location Name
This function allows to create the name of the location using a 14-character string.
Default is No location.
Contact Name
This function allows to create the name of the contact using a 14-character string.
Default is No contact.
IP Address Assignment
Fixed: Assigns the static or fixed IP address.
DHCP: Assigns the dynamic IP address (DHCP protocol). Default value.
IP Address
These values set the IP Address. The address is represented by a decimal notation where the decimal
values are divided by points in four fields.
Each field ranges between 0 and 255.
Default is 127.000.000.000.
Subnet Mask
These values set the Subnet Mask number. This number is represented by a decimal notation where
the decimal values are divided by points in four fields.
Each field ranges between 0 and 255.
Default is 255.255.254.000.
Default Gateway
These values set the Default Gateway address. This address is represented by a decimal notation
where the decimal values are divided by points in four fields.
Each field ranges between 0 and 255.
Default is 000.000.000.000.
SMTP Service
Disabled: Disables the SMTP (Simple Mail Transfer Protocol) service, that is
disables the reception/transfer/error service of the e-mail.
Enabled: Enables the SMTP service, that is enables the reception/transfer/error service of the e-
mail. Default is Disabled.
Table 2 Network Parameters (available for configuration)
