LAN User Manual
MAN10244-01 5
Mail Server Address
These values set the mail server address. This number is represented by a decimal notation where the
decimal values are divided by points in four fields. Each field ranges between 0 and 255.
Default is 000.000.000.000.
NOTE: Item selection on the printer menu allowed only if the “SMTP Service” function choice is
Enabled.
E-mail Address (Sender)
This function allows to write the sender e-mail address using a 48-character string.
Default is an empty string.
E-mail Address (Receiver)
This function allows to write the e-mail address where you can notify the failures using a 48-character
string.
Default is an empty string.
NOTE: Item selection on the printer menu allowed only if the “SMTP Service” function choice is
Enabled.
HTTPD Service
Disabled: Disables the HTTPD (Hypertext Transfer Protocol) service, that is disables Printer
WEB Page.
Enabled: Enables the HTTPD service, that is enables Printer WEB Page. Default is Enabled.
SMBD Service
Disabled: Disables the SMBD (Server Message Block) service, that is disables sharing files.
Enabled: Enables the SMBD service, that is enables sharing files..
Default is Enabled.
NOTE: Item selection on the printer menu allowed only if the “SMTP Service” function choice is
Enabled. The LAN card has also an extra set of programmable fields set to their default values
and not configurable at the user level.
TELNET Service
Disabled: Disables the TELNET service, that is disables bidirectional interactive text-
oriented communications facility using a virtual terminal connection.
Enabled: Enables the TELNET service, that is enables bidirectional interactive text-oriented
communications facility using a virtual terminal connection .
Default is Enabled.
FTP Service
Disabled: Disables the FTP (File Transfer Protocol) service, that is disables copy a file from one
host to another over a TCP-based network.
Enabled: Enables the FTP service, that is enables copy a file from one host to another over a
TCP-based network.
Default is Enabled.
LPR Service
Disabled: Disables the LPR (Line Printer Remote protocol) service, that is disables network
protocol for receiving print jobs to a remote host..
Enabled: Enables the LPR service, that is enables network protocol for receiving print jobs to a
remote host..
Default is Enabled.
DIRECTIP Service
Disabled: Disables the DIRECTIP service, that is disables Direct IP Printer Sharing.
Enabled: Enables the DIRECTIP service, that is enables Direct IP Printer Sharing .
Default is Enabled.
SNMPD Service
Disabled: Disables the SNMPD (Simple Network Management Protocol) service, that is disables
use of MIB.
Enabled: Enables the SNMPD service, that is enables use of MIB.
Default is Enabled.
Table 2 Network Parameters (available for configuration)
