BEFORE FIRST USE
WARNING!
Ensure that the electrical and water connections comply with the installation instructions.
Remove any material from the drum.
We recommend you to run a wash programme without any load, to clear any residues
which may have been left by the manufacturing process. Pour approx. 100 ml of detergent
straight into the drum and run a cotton cycle at 60°C. When the programme is finished the
machine will be ready to use.
DAILY USE
Load the laundry
1. Open the door by carefully pulling the
door handle outwards. Place the laundry
in the drum, one item at a time, shaking
them out as much as possible.
2. Close firmly the door. You must hear a
click during closing.
WARNING!
Do not embed the laundry between the door
and the rubber joint.
Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops. Meas-
ure out the amount of detergent required, pour it
into the larger compartment on the left
.
10 Before first use
