Golf Performance Monitors PureFlight
™
Operating Guide
Version 1.3 www.zelocity.com 1-888-ZELOCITY 19 of 21
Not getting readings from short
irons or wedge shots.
Unit displays READY but no
measurements reported.
Place the unit in WEDGE mode by simultaneously pressing the
MODE and UP ARROW keys and selecting “WEDGE” (see
Monitoring Short-Distance Shots in WEDGE mode).
Try placing the ball on a tee to ensure solid contact with the
clubface, to provide a loud enough signal to trigger the unit.
The microphone may not always “hear” shots with the shorter
clubs. A “lie board” can also be used to increase the sound
when the ball is struck.
Try using the unit in MODE 1
Make sure the unit is powered on and positioned properly for
the mode you are using.
¾ For MODE 1, position the unit to the side of the ball 6” and
behind the ball 6”with the white front panel of the unit
pointing down the target line.
¾ For MODE 2, plug the microphone into the microphone
extension cable and plug the other end of the cable into the
back panel of the unit. The unit should be placed the
recommended distance behind the ball (see PureFlight™
Set Up for MODE 2 instructions), pointed down the target
line, with the Mode 2 microphone cable stretched towards
the ball. The microphone should be placed 6” to the side of
the ball, pointed at the ball. (We recommend anchoring the
microphone with a few golf tees.)
I want to connect the unit to my
computer, but it doesn’t have a
serial port. It just has USB ports.
Purchase a USB-to-Serial port adapter. We recommend the
following two manufacturers.
¾ Belkin Part # F5U103, www.belkin.com.
¾ Radio Shack Catalog # 26-183, www.radioshack.com.
