Golf Performance Monitors PureFlight
™
Operating Guide
Version 1.3 www.zelocity.com 1-888-ZELOCITY 16 of 21
Troubleshooting
Problem Resolution
For most common problems,
execute a PureFlight™ self-test
first.
Run the “Full Unit Self-Test”
¾ Insert the microphone or microphone/cable combination.
Use “Down Arrow” and “MODE” at the same time to begin
(follow displayed instructions). “SELF TST” will be
displayed, followed by “TST Y or N”. Select “Up Arrow”
for “Y” or “Down Arrow” for “N”.
¾ Selecting “Y”, the unit will then go through two tests and
display “PASSED” or “FAILED” at each step. Tests for
radar and microphone functionality during which you will
need to blow into the microphone or clap when prompted.
If the unit passes both self-tests, continue on to the more
specific problems below.
If the unit fails the microphone test when you have the
microphone and cable inserted, try testing without the
cable. This will indicate whether the cable or the
microphone itself is defective.
If either test fails, contact our Support department at
Unit won’t power on.
Make sure you firmly press the power button.
Make sure the battery is charged.
¾ Turn the unit off to recharge the battery. Plug in the power
supply to the product and into a surge protected AC outlet
or power strip. Power surges can affect the integrity of the
battery. Use a surge protected power strip if you have
power surges in your area. Charge the battery for 6 to 8
hours to fully charge.
Try powering on with the power supply plugged in.
¾ If this works, your battery, the charging circuit, or the unit
itself may be damaged.
Contact our Support department at 888.zelocity or
