37
Leica IP S
4. Instrument Setup
Starting installation:
1. Open the printer folder:
START --> SETTINGS --> PRINTERS
2. Double-click the ADD PRINTER icon. The ADD PRINTER WIZARD, which
guides you through the rest of the installation, is started.
Add printer wizard
1. The printer is controlled by the computer to which it is connected; there-
fore, MY COMPUTER must be selected.
2. Insert the correct information—according to your current system—in
the dialog boxes that follow. Click NEXT to move on to the next dialog
box.
3. In the next dialog box, an available serial interface (COM 1, etc.) must be
selected, as the printer only works with RS 232 interfaces. Do not select
a parallel printer port (LPT ...)!
4. Next, select the printer manufacturer and model. Click HAVE DISK... to
open the INSTALL FROM DISK dialog box.
5. Insert the CD containing the printer driver (part of standard delivery) into
the CD-ROM drive and enter the following path in the input field:
X:\IP_Driver\IP_S\English (for English user interface) and con-
firm with OK. "
X" is to be replaced by the letter corresponding to the drive
containing the CD.
4.11 Installing the printer driver
This printer driver only runs under the operating systems Microsoft Windows NT 4.0, Win-
dows 2000 and Windows XP. Installation described is for Windows 2000. Any steps that need
to be carried out in a different way when installing under other Windows versions are also
explained below.
"Microsoft", "Windows NT", "Windows 2000", “Windows XP” and “Windows 7 (32 bit and
64 bit)” are registered trademarks of Microsoft Corporation.
You must have administrator rights to be able to install the printer driver.
