Dil ID: 14
Dil Adı: sloavakia
Dil Kodu: sk4tayfun Produkty značky Cadillac
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



You could unwrap the tape and splice into the wires from the connector. But I chose instead
to make jumpers.
You will need 1/8" spade connectors. Since I only had 1/4", I simply grinded down the male
connectors.
Attach these jumpers to the outlet as shown:
Leave one end of the blue wire bare as shown, this will connect to the blue wire you just ran
in previous step with another male spade connector.
Attach the blue jumper to the blue wire in the car, then connect both jumpers to the harness
from the car as shown below: