13
Unanswered calls
If someone has tried to reach you, the text “Calls: 1” appears on your display.
To call this number back, press the Foxkey below
“Calls:1” and lift the handset or press the loudspeaker
key
or
to delete the entry, press the Foxkey below “del”.
Incoming calls are only stored if caller ID was transmitted.
If you have received several calls you can scroll through the list of callers by pressing the
Foxkey under
or .
Press the key to display the date and time of the call.
After more than 20 unanswered calls, the oldest entry is overwritten.
If the same number calls several times, it is only stored once with the date and time of
the last attempt..
DTMF (Dual Tone Multi Frequency) dialling
Once a connection has been established, the phone automatically switches to DTMF dialling. This
allows you to activate specific functions be keying in codes (e.g. remote control of an answering
machine).
Parking and retrieving a call
During a call you can park it in order to continue it on another telephone. You can even unplug
the telephone once the call is parked, and plug it in at another socket on the same ISDN
connection.
While the call is active, press the Foxkey under
and
“Park”; replace the handset.
Retrieve the call by lifting the handset and pressing the
Foxkey under “Park”.
A call can be parked for a maximum of three minutes, after which time the exchange
automatically clears the connection.
Parking is carried out automatically via a predefined park code (code “1”).
If you operate several different ISDN sets on the same connection, we recommend you
set a universal parking code or enter the park code every time you park (see section on
“Programming the call parking code”).
Using the extended-feature functions
06.06.95 09:42
Calls: 1
del
>A 1: 06109738400
DM. 0.20 ->2
06109738400
Dial: __
Park
ETK30_2.PM6 19.03.97, 17:2913
