11
Terminating a three-way conference call
To speak to both call partners separately again, press the preprogrammed auto-dial key again.
If the telephone is connected to a PBX, please refer to the relevant section in your PBX
operating manual.
Automatic call-back if busy
Contact your telecoms operator for information on the introduction date for this service.
If the person you have called is busy, you can activate an automatic ringback call.
Called party is busy. “Call-Back” is displayed.
Press the Foxkey under “Call-Back” to activate automatic
call-back.
Replace the handset. The
symbol is displayed.
As soon as the person you were calling has hung up, a
signal indicates that the line is free. The number is
automatically redialled if you lift the handset within 15
seconds of hearing the signal.
If you no longer need to answer the call-back, leave the handset on-hook or press the
ESC key.
A call-back remains activate for approximately 40 minutes, after which it is
automatically cancelled by the exchange.
You can deactivate a call-back by pressing the Foxkey under then pressing under
“del”.
If the telephone is connected to a PBX, please refer to the relevant section in your PBX
operating manual.
Called User Busy
Call-Back:
06.06.95 09:42
Using the extended-feature functions
ETK30_2.PM6 19.03.97, 17:2811
