TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
32
6. Handset Configuration
NOTE: The selected World Mode Regulatory Domain determines which channels to be used.
See Bands and Channels used by WiFi a-radio.
•All
•Non DFS
• UNII-1
• UNII-3
• UNII-1, UNII-2
• UNII-1, UNII-2, UNII-3
• UNII-1, UNII-2, UNII-2 Extended
• Advanced
Bands and Channels used by WiFi a-radio
Frequency band Channels
Non DFS 5.150 - 5.250 MHz,
5.725
- 5.845 MH
z
36,40,44,48
149,153,157,161, 165
UNII-1 5.150 - 5.250 MHz 36,40,44,48
UNII-2 5.250 - 5.350 MHz 52,56,60,64
UNII-2 Extended 5.470 - 5.725 MHz 100, 104, 108, 112,116, 120, 124, 128, 132,
126, 140
UNII-3 5.825 - 5.835 MHz 149,153,157,161
802.11 b/g/n Channels
Defines which 802.11b/g/n channels to use. It is r
ecommended to use the default valu
e
“1,6,11“. If set to “All”, all channels are scanned for access points which decreases the
WLAN performance. Select “Advanced“ only if the channels shall be set in the parameter
Advanced: 802.11 channels.
1 Select Network > Network A (B, C, or D).
2In the 802.11 protocol drop-down list, select “802.11b/g/
n“.
3In the 802.11b/g/n channels drop-
down list, select one of the following:
•All
• 1,6,11
• Advanced
Advanced: 802.11 Channels
Defines which 802.11 channels to use. Only used if the parameter in the 802.11b/g/n
channels, or 802.11a/n channels is set to “Adva
nced“.
NOTE
: It is not possible to scan channels in 802.11b/g/n and 802.11a/n simultaneously.
1 S
elect Network > Network A (B, C, or D).
2 Enter channels to scan in a comma-separated list, for example 1,6,11 (the order has
no impact; 11,6,1 will give the same result).
