TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
29
6. Handset Configuration
6. Handset Configuration
NOTE: This chapter describes settings in parameter definition files (.def). These files are
regularly updated and settings may change slightly. For example "On" to "Enable" or a
parameter can be moved to another directory.
The handset requires some settings to function in the VoWiFi system. All se
ttings are done
in the PDM
/IMS3. This section describes the available settings for the handset. The first part
explains network settings and the second handset settings.
For more information, see the PDM Online Help that is accessible for each parameter by
clicking the icon in the Edit parameters view, or the Installation and Operation Manual,
Portable Device Manager (PDM), TD 92325EN.
6.1 Select Network
The handset can switch between four different WLAN system configurations called Network
A, Network B, Network C, and Network D. The name can be changed (via PDM or IMS3) and is
visible in the handset, see 6.1.2 Change Name of Network.
A handset can be configured for up to four different WLANs but only for one IMS3 and one
VoIP System.
The configured networks in PDM must have a SSID value in order to view them in the
handset.
Network A is the default system and used throughout this manual.
1 Select Network > General.
2In the Active n
etwork drop-down list, select “Network A”.
6.1.1 Change Active Network
1 Select Network > General.
2In the Active netw
ork drop-down list, select “Network A“, “Network B“, “Network C“,
or “Network D“.
6.1.2 Change Name of Network
The name is shown when selecting network in the handset.
1 Select Network > Network A (or B, C, or D).
2 In the Network name field, enter the name of the network.
6.1.3 Enable Switch between Networks
The handset may be configured to switch bet
ween networks on the site.
1 Find parameter Network > General > Auto-switch network, and
select “Enable”.
Parameter Auto-switch network time-out appears. This pa
rameter defines the time
before the handset tries to connect with the next included network.
2 Enter a value in seconds for parame
ter Auto-switch network time-out.
3 For the networks that should be included in the auto-switch network:
Find parameter Network > Network A (B, C, D) > Include in a
u
to-switch network, and
select “Yes” to enable switch to Network A (B, C, D).
