3 PREPARATIONS FOR OBSERVATION
3-1-1-2
IX Configuration
1.
Turn the light paUi selector dial (1) on ttie right
side of Uie microscope to the ^ position. While
looking through the eyepieces, bring the
specimen into focus.
Make sure to adjust the diopter adjustment ring
of Uie eyepiece. (Refer to the 1X50/70 instiuction
manual.)
2.
Operate the cube tun-et to engage the cube
corresponding to the specimen fluorochrome.
3. While looking through the eyepieces, bring the
specimen into focus. Make sure to adjust Uie
eyepiece diopter correctiy. (Refer to the IX
instmction manual.)
* When using the Z-motor, clear the check from
the [Engage motor] check box (see Section 4-
2-2-1 ofthe OPERATION MANUAL) on the \Z
Stage] panel on the [Acquire] panel. Then
operate the microscope frame's focusing
adjustment knob (fine) to bring the specimen
into focus. Damage to the Z-motor may occur
if the microscope frame's focusing adjustment
knob is operated while the [Engage motor]
check box is checked.
* The specimen may float during oil immersion
observation.
While refemng to the figure on ttie left, attach Uie
stage clips provided witii the microscope frame.
3-2
