3 PREPARATIONS FOR OBSERVATION
3 PREPARATIONS FOR OBSERVATION
This section explains the order of procedures for specimen obsen/ation.
3-1 Fluorescence Observation
3-1-1 Bringing the Specimen into Focus
3-1-1-1
BX50, BXWI Configuration
1.
Push in the light path selector knob (1) on tiie
binocular observation tube to select Uie 100% at
binocular eyepieces setting.
2.
Operate the cube turret to engage the cube
corresponding to the specimen fluorochrome.
3. While looking through tiie eyepieces, bring the
specimen into focus. Make sure to adjust the
eyepiece diopter correctly. (Refer to tiie BX
instmction manual.)
stage clips
* When using the Z-motor, clear the check from
the [Engage motor] check box (see Section 4-
2-2-1 of the OPERATION MANUAL) on the [Z
Stage] panel on the [Acquire] panel. Then
operate the microscope frame's focusing
adjustment knob (fine) to bring the specimen
into focus. Damage to the Z-motor may occur
if the microscope frame's focusing adjustment
knob is operated while the [Engage motor]
check box Is checked.
* The specimen may float during oil immersion
observation.
While refening to tiie figure on the left, attach ttie
stage clips provided with the microscope frame.
3-1
