Crestron DIN-AP3MEX Automation Processor with infiNET EX
Operations & Installation Guide – DOC. 7492B Automation Processor: DIN-AP3MEX • 17
Uploading and Upgrading
Crestron recommends using the latest programming software and that
each device contains the latest firmware to take advantage of the most
recently released features. However, before attempting to upload or
upgrade it is necessary to establish communication. Once communication
has been established, files (for example, programs or firmware) can be
transferred to the control system (or device). Finally, program checks can
be performed (such as changing the device ID or creating an IP table) to
ensure proper functioning.
NOTE: Crestron software and any files on the website are for authorized
Crestron dealers and Crestron Service Providers (CSPs) only. New users
must register to obtain access to certain areas of the site (including the
FTP site).
Establishing Communication
Use Crestron Toolbox for communicating with the DIN-AP3MEX; refer
to the Crestron Toolbox help file for details. There are two methods of
communication: USB and TCP/IP.
USB
NOTE: Required for initial setup of Ethernet parameters.
NOTE: Required for loading projects and firmware.
USB Communication
DIN-AP3MEX
PC Running
Crestron Toolbox
USB
The COMPUTER port on the DIN-AP3MEX connects to the USB port
on the PC via the included Type A to Type B USB cable:
1. Click Tools | System Info.
2. Click the
icon.
