Crestron DIN-AP3MEX Automation Processor with infiNET EX
Operations & Installation Guide – DOC. 7492B Automation Processor: DIN-AP3MEX • 15
To prevent overheating, do not operate this product in an area that
exceeds the environmental temperature range listed in the table of
specifications. Consider using forced air ventilation to reduce
overheating. Consideration must be given if installed in a closed or multi-
unit rack assembly since the operating ambient temperature of the
environment may be greater than the room ambient temperature. Contact
with thermal insulating materials should be avoided on all sides of the
unit.
Hardware Hookup
Make the necessary connections as called out in the illustrations that
follow. Refer to “Network Wiring” on page 14 before attaching the
4-position terminal block connectors. Apply power after all connections
have been made.
When making connections to the DIN-AP3MEX, note the following:
• Use Crestron power supplies for Crestron equipment.
• The included cable cannot be extended.
Hardware Connections for the DIN-AP3MEX (Front View)
COMPUTER:
To Computer Console
NET (24 Y Z G):
To Any Cresnet
Network Device
