The closing state of remote controller
Sleeping button “ ”
Which enables you to start the automatic operation in sleeping mode and stop by
pressing on it again.
Wind direction adjusting button “ ”
Press the button, the horizontal airflow direction plate can adjust automatically.
When you have the desired wind direction, please press it again, the airflow direc
-
tion plate will stop at the situation.
Fan speed selection button “ ”
MUP-07, 09 and 12:You can select fanspeed from “Power”, “High”, “Low”, “Mute”
MUP-18 and 24: You can select fan speed from “Auto”, “High”, “Med”, “Low”
Remark: There is no strong wind speed in fan mode.
Temp reducing button “ ”
Press the button once, the setting temperature drops 1°C. Press the button con
-
tinuously for more than 1 second, the setting temperature drops at the speed of
4°C/s the lowest setting temperature is 16°C.
Temp increasing button “ ”
Press the button once, the setting temperature drops 1°C. Press the button con
-
tinuously for more than 1 second, the setting temperature increases at the speed
of 4°C/s, the highest setting temperature is 32°C
Selection button for operation mode “ ”
Which enables you to select different operation modes, after each pressing, the
operation mode will be changed. It shows in the following display.
Remark: Cold wind type has no heating function.
“ ” button
This button have the function of cancelling the timer time.
23
UND
CLIMA
®
LPMUTEH
FEEL COOL DRY FAN
MEDAUTO LH
°C
—
°C
MODE
ANCEL
