CANDoo Professional
Step #2 - Fix any Active Faults
Look in the table for any Active faults. The underlying problem causing these faults must be
fixed. Refer to the Diagnostic Procedures section of the Service Manual for the watercraft for
instructions related to troubleshooting problems related to the component(s) indicated by the fault.
Step #3- Analyze the Occurred (History) Faults (See the Fault History Tab for more details)
Understanding Stored Faults can be tricky. While transient problems (those that happen briefly and
then go away) will log an occurred fault, not all faults are stored by the system, so when you shut
off the watercraft, the fault is lost. Additionally, the Kawasaki ECU will not trigger a fault for many
components unless the engine is running.
Step #4 - Run watercraft to verify problems are fixed
It is always advisable to run the watercraft again after fixing and clearing faults to ensure that all
problems are fixed. If you are running the watercraft while CANDooPro is connected, you can hit
the Refresh button at any time to check for new faults.
3.3.3.3.3 Fault History Tab
CANDooPro > Vehicles > Kawasaki Jet Skis(See 3.3) > 4-Stroke Ultra
250/260/300X/LX Models(See 3.3.3) > Working with CANDooPro(See 3.3.3.3) >
Fault History Tab
(See
3.3.3.3.2.2)
(See
3.3.3.3.4)
