CANDoo Professional
Kawasaki 2007+ Ultra 250X/260X/300X/LX Fault History
The Kawasaki 2007+ Ultra 250X/260X/300X/LX models have fault storing/ logging capability that is
quite different from the earlier models. The basic concept is when a fault occurs, it stores this fault
in the history table, along with a large number of operating parameters. This is a pretty powerful
feature that is helpful for capturing transient (intermittent) faults, that are hard to replicate.
However, there are a number of quirks with this system:
Not all faults that occur get captured in the History table. There is no good guide to what
faults get stored, and which do not.
A maximum of 3 faults can be stored in the History table. If a particular fault happens
repeatedly, it will store the same fault repeatedly in all three positions.
The Kawasaki ECU's do not store running hour information. Therefore, they cannot track
when a fault occurs. Is it a recent fault in the History table? Did it happen many hours
ago?
Kawasaki did not give any method of clearing faults. They are always stored, until a new
fault occurs and overwrite old faults in the table.
3.3.3.3.4 Activate Tab
CANDooPro > Vehicles > Kawasaki Jet Skis(See 3.3) > 4-Stroke Ultra
250/260/300X/LX Models(See 3.3.3) > Working with CANDooPro(See 3.3.3.3) >
Activate Tab
