CANDoo Professional
The Candoopro system will read the data from the ECU. You are now ready to read and clear
faults, view operating history, and activate various functions available for the Ultra series Jet Ski.
3.3.3.3 Working with CANDooPro
Please refer to each individual section for details
3.3.3.3.1 Monitor Tab
CANDooPro > Vehicles > Kawasaki Jet Skis(See 3.3) > 4-Stroke Ultra
250/260/300X/LX Models(See 3.3.3) > Working with CANDooPro(See 3.3.3.3) >
Monitor Tab
(See
3.3.3.3)
(See
3.3.3.3.2)
The Monitor tab:
The Monitor feature allows you to monitor a very large number engine parameters, primarily for
observing sensor readings while engine is stationary, and then while running.
Also note that you can use the engine monitor for checking the operation of the TPS, by moving the
throttle and watching the TPS needle moving. Note that the needle will naturally jump as the
screen refreshes every second or so.
When you first start up CANDooPro, the Monitor feature is not running. To start the monitor, press
the Start Monitor button. When the monitor is running, it can be stopped by pressing the Stop
Monitor button.(the Start Monitor button changes over to Stop Monitor when the monitor function is
running)
NOTE: The ECU on the Kawasaki STX Jet Skis communicates the engine data very slowly
to the CANDooPro system, so it can take a very long time to refresh the data. For this
reason, the CANDooPro system allows you to select only the key data points you wish to
observe, which allows the refresh of data to occur much faster than going through the large
table of data. To observe a particular data element, simply start the monitor, then check the
box next to the service data you wish to monitor.
