CANDoo Professional
7. Insert a Kawasaki key (either FAST or SLO) into the key switch to power up the ski, ensure the
emergency lanyard is attached to the stop switch, and you are now ready to start the diagnostic
session.
Starting the Diagnostic Session:
When the Candoopro application is running, and the ECU has been powered up, you are ready to
start the diagnostic session.
Once the ECU is powered up, the Candoopro application should detect the Kawasaki ECU,
indicated by the ski icon on the lower left of the screen changing from red to green, and the status
should change from “ Looking for Vehicle” , to “ Late Kawasaki” for the Ultra series skis.
Once the Kawasaki ECU detected indication appears, go to the upper left of the screen, select
“ Vehicle”, then “ Read Vehicle”.
