VDSL Hospitality 100+ Rooms Setup Guide
1/05/05 Page 7 of 23
7. Once you connect the rooms to the VES-2500 via the Telco-50 cables, each room’s telephone
port should be ready for modem installation. Install a Prestige 841 VDSL modem in each room
by connecting the unit’s “VDSL” port to the room’s telephone wall jack. You can then connect the
room’s phone to the “Phone” port on the back of the P841 for voice service. You should then
connect small length of Ethernet cable to each modem’s “LAN 10/100M” port for the customer’s
computer use. This way the P841 can split voice and data traffic, allowing room customers to use
the phone and Internet simultaneously.
8. Remember that all of your components will require their own power connection for operation, to
include each P841 modem in each room. Each unit will be supplied with the appropriate cables
or power adapters. Please ensure all units are powered on when in use.
9. If you are using a Property Management System (PMS) to track customer room charges, you
may want to connect this to the PMS port of the VSG-1200 as well. Although this document does
not describe how to set up the VSG-1200 for use with a PMS, you can find more information
about this in the VSG-1200 User’s Guide.
Be sure to use the diagram on page 3 as a basic reference for installation.
You should now be ready to configure your VSG-1200, ES-3024, and VES-2500 for use. For more
information about hardware installation, we strongly urge you to review the User’s Guides for the VSG-
1200, ES-3024, and VES-2500.
MDF Upper
Block
Telco-50
Connector
MDF Lower
Block
Telco-50
Connector
VES-2500
“CO”
Connector
VES-2500
Spl
“USER”
Connector
