Presetting Method
Press the "MENU" button, set the cursor to PROGRAMME by using the Position Up and Down buttons, and then select
PROGRAMME by using the Position Left and Right buttons.
( VCR Operation )
MEKU
f
PROGRAMME
POS DATA
► - -
START STOP
1994 to
1 (SAT} 12;30^
Note;
When the Timer Setting mode is not set, the Timer setting screen is displayed initially.
Set the Timer Recording mode by shifting the cursor.
For example, when you want to record programme No. 4 on Oct., 5 from 14:30 to 15:30 in the SP mode.
3, Insert a tape and push the 'TIMER REC" button. The "TIMER REG” indicator lights up.
Press again to cancel the timer recording.
TIMER REC
La,
Note: c_:i
- When the tape without erasure prevention lab is inserted, the tape is automatically ejected.
Or when there is no recording tape, the TIMER-REC indicator blinks.
- Unless reservation via the timer is cancelled, it is impossible to operate the VCR and to
eject the tape.
4. Press the "MENU" button twice, to return the set to the normal viewing condition.
Note :
Recording starts from approx. 20 sec. prior to the arrival of preset time.
Helpful Hint
1. When you want to set another programme, shift the cursor to a line not yet set, and set it as described above.
2. To erase contents of the Timer Recording mode, shift the cursor to the line to be erased and push the (N) button.
3. After switching the TIMER REC indicator off by pressing the "TIMER REC" button, you can use the VCR as
usual, except during the time for which Timer Recording mode is set. Insert a tape before recording starts and press
the "TIMER REC" button.
4. When a preset lime has passed, the contents of corresponding preset line is erased.
5. When you want to stop recording during Timer Recording, press the "TIMER REC" button.
6. When the TIMER REC Indicator is light on, Timer Recording is not performed.
19
