Feature Menu Operation)
( Picture Menu AdjustmentOperation)
1 ■ Press the "MENU" button.
2. Select the "FEATURES” by using the Position Left
or Right button.
3. Select the desired item either OFF TIMER mode,
BLUE BACK mode or REPEAT mode by using the
Position Up or Down button.
1. Press the "MENU" button.
OFF TIMER
------
BLUE BACK
t
I
-------
REPEAT-
■J
MAIN MENU
FEATURES
CLOCK
PROGRAMME
GUIDE CH
2. Select the "PICTURE” by using the Position Up or
down button.
OFF TIMER mode
The TV set can be preset to switch off after a
fixed period of time. By pressing the Position
Left or Right button, you can select the preset
time either 30, 60, 90 or AUTO mode.
30 60 90
AUTO
In Auto mode, if the TV set is not switched off, it will
automatically go to stand-by condition 5 minutes
after the TV station ends broadcasting.
Note :
{Setting Off-Timer to AUTO mode will not operate
when the Television set is in AV mode.)
3. Select the desired item either COLOUR, NTSC-TINT,
BRIGHT, CONTRAST and SHARPNESS by using the
Position Left or Right button.
PICTURE
i COLOURI
NTSC-TINT
BRIGHT
CONTRAST
SHARPNESS
4. The level of selected item can be adjusted by pressing
the Position Left or Right button.
Right button ; to less level
Left button ; to high level
BLUE BACK mode
When no picture signal is input, or the signal is weak,
the screen reverts to a blue background colour.
Disable this Feature to continue watching very weak
signals.
Blue if no input picture signal
or input signal is weak.
Note :
If BLUE BACK Mode is set on while a VCR signal is
being viewed, selecting CUE or REVIEW or when
tracking is deviated, may cause the screen to revert to
the blue background colour. Disable this Feature to
view correctly.
REPEAT Mode
The tape is played back repeatedly from the start to
the end of the recorded content.
PICTURE
COLOURI
NTSC-TINT
BRIGHT
CONTRAST
SHARPNESS
<][>
Л
COLOUR
1
__
-1^
____
1
V _
_ J
Helpful Hint ( NORMALIZATION BUTTON )
By pressing the Normalization "N" button on the Remote
Control while the Picture menu is displayed, the selected
menu will be changed to the Normal Mode.
Normalization will not occur if the menu is not displayed when
the "N" button iS'pressed.
The normal mode is the factory preset condition. Returning to
this original condition is called "Normalization".
16
