Clear-Com Encore 11
TR-50 Talent Receiver
The TR-50 is an amplied single-channel talent beltpack
with volume control. It connects to the program interrupt
controller with a standard microphone cable. It has a
mini earphone jack output and includes a talent earset.
It should be paired with the CC-010A IFB ear set.
PRC-2 UHF Wireless IFB Receiver
The IFB receiver has default UHF frequencies that can
be set without power or a transmitter signal. Up to ve
additional frequencies can be stored in scan mode. The
design uses +/-20 kHz FM deviation for efcient use of the
bandwidth with compandor noise reduction circuitry for
an excellent signal to noise ratio. The receiver will drive a
wide variety of earbuds, headphones and induction neck
loops at substantial levels, with loads from 16 Ohms to
600 Ohms. It should be paired with the CC-010A IFB ear set.
Not available for CE countries.
PTX-3 UHF Wireless IFB Transmitter
The wireless IFB transmitter base station has 256 selectable
UHF frequencies at 100 kHz increments. Microprocessor
control enables easy operation and eliminates transients
at turn-on and turn-off. Transmitter can be used as a
standalone device or rack mounted with the PRK-2 kit.
Not available for CE countries.
RCS-2700 Programmable Source Assignment Panel
The 2RU RCS-2700 is ideal for medium to large installations
where channel assignments to remote stations frequently
change. Eight master channel sources can be assigned
to any 24 remote station destinations, and additional
RCS-2700 units can be connected for up to 15 sources
and 72 destinations. It can store 14 presets.
PIC-4704Program Interrupt Controller
Each IFB controller handles up to four talent receivers.
For use with MA-704 and AX-704 IFB Control Panels or
intercom stations. This unit contains the circuitry for
selecting one of two program sources, sending the program
to the IFB channels, and interrupting it via the talent
control station. The controller has variable audio program
dip-level, monaural or stereo/split-feed outputs, and im-
proved and intuitive user interface. It requires a 6-pin XLR
cable for connection to MA-704/AX-704 control panels.
MA-704/AX-704 IFB Control Panel
These console-mount or rack-mount units control
“program interrupt” (IFB) to the talent. The MA-704
includes a gooseneck microphone connector, illuminated
“All Talent”, and four individual talent push buttons. The
AX-704 permits expansion in multiples of four. Both accept
the “hot mic out” from a Clear-Com station. An optional
CEP-RK rack mount xture is available for the MA-704
and AX-704 panels.
PERIPHERALS
