3
How to Congure the TP-Link TL-WR702N from Network to “Stand Alone” Mode:
[Windows 7 & Google Chrome Example]
Set a Static IP on your device
A Left-Click on the network signal strength indicator.
B Connect to the “QRSPNO Network”
C After you’re connected go back and select “Open Network and Sharing Center”
D Select “Change Adapter Settings”
E
Right-Click over your active “Wireless Network Connection
Select “Properties”.
F
Select “Internet Protocol Version 4 (TCP/IPv4)”
Select “Properties”.
G
Select “Use the following IP address” and enter:
IP address: 192.168.0.5
Subnet mask: 255.255.255.0
Gateway: 192.168.0.1
Press the OK button, wait a few seconds.
Close all windows.
Open your browser and navigate to 192.168.0.254
Enter “admin” as the User Name and Password.
Press the “Log In” button.
Click “Quick Setup”
Click “Next”
Select “Router Mode”
Click “Next”
Change the SSID to QRSPNO
Set Channel to “Auto”
Under “Security Options:” select “Disable Security”
Click “Next”
Under “WAN Connection Type” select “Dynamic IP”
Click “Next”
Under “MAC Clone” select “No”
Click “Next”
Click “Reboot”
Click “OK”
Restarting
Wait for the TP-Link conguration to nish and restart.
Close browser when 100% complete.
H
The device is now ready for “Stand-Alone Mode” on the PMII.
Connect to the QRSPNO
Open Safari or Google Chrome and navigate to 192.168.1.1
On the QRS PNOmation II remote control:
Press the following buttons in sequence…
SHIFT FUNC 9 9 0
The third light should be green.
Press SHIT INFO to conrm the 192.168.1.1 address.
Lighted button #3 on the PMII processor should be SOLID green.
Re-do steps A-G above.
At step “G” select “Obtain an IP address automatically”
Press the OK button, wait a few seconds.
Close all windows.
