30
ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a CID
or ANI number received from the Central Office with a name programmed in this
translation table. If there is no match between a received number and a name in
this table, [no CID name] or [no ANI name] will be displayed.
The translation table consists of 250 (350 if the version is V4.x) entries which
each entry comprised of ten digit telephone number and a 16 digit name.
Names are written using the keypad. Each press of a key will select a character.
Pressing the next key will move the cursor to the next position. For example, if
the directory name is “SAM SMITH”, press the number”7” three times to get the
letter “S”. Now press the number “2” once to get the letter “A”. Continue selecting
characters from the table below to complete your message.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the VOL UP key to move the cursor to the right.
COUNT 1 2 3 4 5
DIAL 0 Q Z . ) 0
DIAL 1 space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P R S & 7
DIAL 8 T U V Q 8
DIAL 9 W X Y ( 9
DIAL Q : = [ ] Q
Open customer programming and follow the instructions below.
31
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD -Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next MMC.
HOLD - Used to clear previous entry.
ACTION DISPLAY
1. Press TRSF and then dial 728 TRANSLATION:(001)
Display shows first entry DIGIT:
2. Dial entry number (e.g., 005) TRANSLATION:(005)
OR use UP and DOWN to scroll DIGIT:_
through entries and press right
soft key to select entry
3. Enter telephone number and press TRANSLATION:(005)
right soft key to advance to name entry DIGIT:3054264100
OR enter telephone number and press
left soft key to return to step 2 above
4. Enter associated name as described TRANSLATION:(005)
above and press right or left soft key to SAMSUNG TELECOM
return to step 2 above
OR
press SPK to save and advance
to next MMC
OR press TRSF to
save and exit programming
DEFAULT DATA: NONE
