28
PROGRAMMING ACCOUNT CODES
This program is used to add or change account code entries.
PROGRAM KEYS
KEYPAD - Used to enter the account code (allowable digits 0–9).
UP & DOWN - Used to select entry number.
FLASH & TRSF - Used to view and change only the used entries.
SPK/RLS - Used to clear data.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 708 ACCOUNT CODE
Display shows (001)
2. Dial the account code entry (e.g., 005) ACCOUNT CODE
OR press UP or DOWN to select the (005)
entry number and press the right soft
key to move the cursor
3. Enter the account code via the dial pad, ACCOUNT CODE
e.g., 1234 (maximum of 12 digits) and (005)123456789012
press the right soft key to move the
cursor back to step 2
4. Press TRSF to store and exit pro-
gramming OR press SPK to store and
advance to the next program
29
SETTING INDIVIDUAL FORWARD
NO ANSWER TIMERS
Each station can have an individual Forward No Answer timer to accommodate
station users with different individual work habits. When adjusting this timer,
take care that the value is not greater than the transfer recall timer. The range is
000–250 seconds.
Open customer programming and follow the instructions below.
PROGRAM KEYS
KEYPAD - Used to set timer values.
UP & DOWN - Used to select extension number.
SPK/RLS - Save data and advance to next program.
ACTION DISPLAY
1. Press TRSF and then dial 502 [201] FWD NO ANS
Display shows 010 SEC _
2. Dial the station number (e.g., 205) OR [205] NO ANS FWD
press UP or DOWN key to select the 010 SEC _
station and press the right soft key OR OR
press ANS/RLS to select all stations [ALL] NO ANS FWD
and press the right soft key SEC _
3. Enter the new value via the dial pad, [205] NO ANS FWD
e.g., 020 (must be three digits) and the 010 SEC 020
system will return to step 2
4. Press TRSF to store and exit pro-
gramming OR press SPK to store and
advance to the next program
