Working with the Menu Options
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
13
NOTE
New values of some parameters come into effect only after the unit is reset (refer to the System
Manual for more details). If the Automatic Reset After Apply option is deselected, the unit must
be reset through the Unit Control window to apply modifications to these parameters.
1.4.3 Tools Menu
The Tools menu, which is only present in Unit Configuration mode, provides
access to unit definition and location functions that are also available through
the toolbar, as shown below.
Figure 1-9: Tools Menu
The Tools menu is comprised of the following options:
Locate Device: This option enables you to find an individual unit using its IP
address. This includes units located behind a router. For more information,
refer to section
1.3.2 .
Set IP Address: This option enables you to set the IP address for a unit based
on its MAC address. For more information, refer section
1.3.3 .
1.4.4 Settings Menu
The Settings menu comprises a single option and sub-menu, as shown below:
Figure 1-10: Settings Menu
Select Discovery Timeout and then select 10 sec, 5 sec or 2 sec to define the
maximum amount of time, in seconds, for which the system searches for each
device when using the Load Devices feature. For more information on using the
Load Devices feature, refer to section
1.4.1 .
1.4.5 Help Menu
Selecting About from the Help menu enables you to view version and product
information regarding the current BreezeCONFIG application. In addition, the
About window provides a link to the Alvarion technical support website.
