Getting Started
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
12
1.4.2 Mode Menu
There are several modes in which you can operate the BreezeCONFIG utility.
These modes are selected through the Mode menu, which is shown below. The
selected option(s) is indicated by a dot or checkmark.
Figure 1-8: Mode Menu
The Mode menu is comprised of the following options:
Unit Configuration: This is the default mode, which is used for viewing
and/or setting the parameters of a single selected unit. For more information,
refer to section
1.5 .
Multiple Configuration: This mode is used for preparing and downloading
configuration parameters to multiple units simultaneously. For more
information, refer to section
1.6 .
File Loading Window: Select this mode to launch the File Loading utility,
which enables you to upgrade the embedded software in managed units or to
load new feature license or country code files. For more information, refer to
section
1.7 .
Trap Quick View: When set to this mode, the application switches
automatically to the Trap Monitor tab, if a trap message is received and if the
management station is included in the list of trap host stations for the
selected device. The trap host stations for a selected device can be defined in
the Network Management – Send Traps tab. In addition, to view the traps, the
trap sending option in the Network Management – Send Traps tab for the
selected device must be enabled. The Trap Quick View option is only
operational in Unit Configuration mode. The default is deselected, which
means not active.
Automatic Reset after Apply: When this option is enabled, the selected
device is reset each time you click the Apply button after a configuration
modification. During the reset the device’s operation is interrupted and it
cannot be accessed by BreezeCONFIG. Deselecting this option minimizes the
number of times the unit is reset and enables continuous operation of
BreezeCONFIG without waiting until the device is active again. The default is
deselected, which means not active.
