Getting Started
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
16
NOTE
If a parameter that is not applicable to a certain unit type is configured, the unit will not be
configured successfully. For example, if the Broadcast/Multicast Relaying parameter is
configured and uploaded to SU units, which do not support this parameter, then the configuration
change for all SU units will fail.
The Device List on the left side of the main Configuration Utility window can be
populated with updated device information using any of the following
mechanisms:
Local Network Autodiscovery: For a description of how to work with this
feature, refer to section
1.3.1 .
Load Devices: For a description of how to work with this feature, refer to
section
1.4.1 .
You can use one or both of these features to create a list based on multiple
sources. Since the Local Network Autodiscovery feature causes the Device List to
be refreshed, first apply the Local Network Autodiscovery and then use the Load
Devices feature to add more units to the Device List, as required.
To modify multiple unit configurations:
1 From the Device List of the main Configuration Utility window, select the units
for which a modified configuration is required. Use the standard Windows
Shift or Ctrl key commands to select multiple units.
2 Select the product family option at the bottom of the Device List. The Multiple
Configuration mode can be used for either BreezeACCESS VL (BA VL),
BreezeACCESS 4900 (BA 4900) or BreezeNET B units; it cannot be used
simultaneously for two or more product families.
3 In the relevant configuration tabs, modify the required parameters and click
. For a description of each configurable parameter, refer to Chapter 3,
Working with Unit Configurations. The Multiple Configuration window is
displayed.
