ITG User’s Guide
1.
Connect one end of the power adapter that came with the ITG to the power
receptacle
on the rear panel.
2.
Connect the other end of the power adapter to an AC power outlet.
3.
The ITG will execute the memory testing and application code automatically..
2.6
Assigning IP address to the ITG
The IP address is the unique logical address identifying each IP node, such as the ITG, on an
IP
network.
An
IP
address
is
a
32-bit number expressed as four decimal numbers from 0 to
255 separated by periods. The ITG needs static IP
address
and
be
aware
of
the
subnet
mask
and default gateway (typically a router) of your
network to be able to send to and receive
data
from
the IP network. Consult your network manager to obtain a unique and static IP
address for the ITG, the IP
subnet
mask
and
default gateway of your network, and fill out the
work sheet in Appendix A
before
configuring the gateway. Procedures for assigning
IP address, default gateway and subnet mask is available in Chapter 4.
14
Installing
ITG
