Note:
LAN IP Address
and
WLAN IP Address
displays the same value - current IP
address of the virtual
bridge
interface, while the device is operating in
Bridge
mode.
Statistics Reporting
LAN interface Statistics
LAN Statistics: section displays the detailed receive and transmit statistics (
Bytes
,
Packets
,
Errors
) of
LAN
(Ethernet) interface. This statistics represents the total amount
of data and packets transfered between devices through the ethernet interface either
way.
Both unicast IP traffic (conversations between two hosts using HTTP, SMTP, SSH and
other protocols) and broadcast traffic (while addressing all hosts in a given network
range with a single destination IP address) is accounted.
As long as there is some network traffic being generated or passed through the
LAN
interface, Received and Transmitted
Bytes
and
Packets
value will go on increasing.
Errors
value represents the total number of transmitted and received packets for which
an error occurred.
WLAN interface Statistics
WLAN Statistics: section displays the detailed receive and transmit statistics (
Bytes
,
Packets
,
Errors
) of the
wireless
interface.
This statistics represents the total amount of unicast and broadcast IP data transfered
between devices through the
wireless
interface either way.
As long as there is some network traffic being generated or passed through the
'
wireless
interface, Received and Transmitted Bytes, Packets and Errors (if any) value
will go on increasing.
PPP interface Statistics
PPP Statistics: section displays the IP address of the
PPP
interface and the detailed
receive and transmit statistics (
Bytes
,
Packets
,
Errors
) of the
PPP
interface. PPP
statistics are available in
Router
mode only, while
PPPoE
is enabled.
